With these models, you are looking specifically at custom designed units. Upwards to 40 membranes, which will deliver for the customer, (again given the appropriate water quality), anywhere up to 300,000 litres per day.

These units are  self regulating machines, where with their computers, are able to start and stop their own production under their own steam, simply by keeping an eye on their water storage tanks which they are supplying. Any problems should they occur, are displayed on the front panel, and its membranes are better protected because the unit receives a back flush each time it finishes  a cycle of production.

These industrial designed desalination units, will basically be made of one individual unit, but with inner modules (each containing upwards of 10 membranes).

It is programmed with 2 modes of operation. The 1st allowing either each module to operate individually, or your 2nd mode is where your unit will operate, all as one. Benefit of this of course, is that one or more modules can be stopped, while one of the modules can be serviced. Our desalination unit also, is designed so that when it fires up, the computer will start each module separately, each of the multistage motors approximately 2 seconds after each one, allowing for a more gentle drain on your power source.